Interior material refers to a single material or laminated composite material used in automobile interior parts, such as cushions, seat backs, seat covers, seat belts, headrest, handrails, movable folding roofs, all decorative linings, dashboards, grocery boxes, interior shelf panels or rear windowsills, curtains, floor coverings, sunshades, wheel cover coverings, engine coverings and any other indoor organic materials It includes materials such as fillers and cushioning devices that absorb collision energy during a collision. The standard requires that the burning rate of interior materials is not greater than 100mm/min.
To maintain the battery, be sure to bury the battery deep under the protection. Other parts of the vehicle include some air conditioners, lamps, etc., do not directly maintain the vehicle in accordance with the requirements, should rotate the air conditioner (such as light bulbs) and rotate the air conditioner clockwise several degrees. Open the sunshade of the car body in summer, then separate the air conditioner from high and low, and then drive the car to the lower position, two laps, two laps up, in the design of the branches to find the place of ventilation, the electric warm wind can be determined. The maintenance time of each part of the new car in all directions is 15 minutes, which can quickly find out the good effect in a short time. The process of each maintenance is: every delivery inspection, to the highway, any automatic car driver must master the vehicle maintenance knowledge, must not blindly reduce fuel consumption.
The so-called “bright window action”, as the name implies, is the car window bright action. According to the relevant regulations, all car windows are not allowed to carry sunshade films with reflective properties, and the transmittance of ordinary refractive protective films should be more than 50%, that is, the transparency of window glass needs to be more than 50%. The film transmittance of the front windshield and exterior rearview mirror glass of all cars should be higher than 70%.
Spray-free plastics are more and more used in home appliances and automobiles because of their excellent appearance, environmental protection and economy. In the field of household appliances, non-spraying materials are used in soymilk machines, drinking fountains, electric cookers, water heaters, washing machines, refrigerators, air conditioners, televisions and so on. In the automotive field, spray-free materials can be used for DVD face frames, central control panels, side skirts, glove boxes, sunshades, instrument panels, etc.
The warm sunshine room uses strong thermal insulation profiles and glass, and even has auxiliary heating equipment, sunshade system and ventilation system, which can meet the activities, work and living of people who are not affected by the season.
With the improvement of consumption level, in addition to the traditional safety requirements, consumers also pay more attention to comfort and driving experience when buying cars, so the quality of car interior has gradually become one of the important selling points. the automobile interior industry has also ushered in the rapid development. Car interior parts include car seats, door panels, dashboards, armcases, sunshades, column panels and other subdivided categories. Among them, the car seat accounts for the highest proportion of the value of automobile interior parts, reaching 45%, followed by the dashboard assembly, accounting for 13%.
News: Hunan Yongzhou grouting Machine address [Co., Ltd.] Welcome to you at present, spray-free plastic has been successfully used in side skirts, central control panels, DVD panels, glove boxes, sunshades, dashboards and other auto parts in the automotive field. Bioplastics bioplastics are produced by using original plants as raw materials, such as sugar cane and corn, under the action of microorganisms. Commonly used plastics generally use petroleum products, and there are often small molecular harmful substances that do not fully react, while bioplastics, due to the use of low-toxic and low-harm renewable raw materials, greatly reduce the VOCs volatilization in the car after turning it into automobile interior parts. In addition, this bioplastic can be used for subsequent use, and is a more environmentally friendly type of plastic.
Through the implementation of sunshade installation technology, the above effects can be effectively achieved, but this kind of reinforcement will reduce the housing space and may cause damage to the original buildings. Construction enterprises should increase the work guidance and inspection of project measurement, provide personnel and technical support, speed up work deployment and improve relevant standards and systems under the guidance of the spirit of “”. Promoting the application of green energy-saving construction technology in engineering practice and pushing wall construction have a direct impact on the overall heat dissipation performance of the building structure. Related studies show that the heat loss of the external wall accounts for about% of the building heat loss. Enterprises should appoint special personnel to collect by letter and telephone, check accounts with the constructor regularly, and properly preserve